Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Mira Mesa?
Gate repair in Mira Mesa typically runs $175 to $650 for residential electric gates, with most swing-arm and slide-gate motor repairs landing in the $250 to $420 range. A mechanical fix like a bent arm, a misaligned hinge, or a stuck latch is often the cheapest call at $175 to $300, while control board or loop detector replacement pushes toward the higher end. Same-day service is common, and free estimates mean you get an exact number before anyone touches your gate.
We repair gates and nothing else. That focus is why we can tell you, usually within a few minutes of a phone call, whether you’re looking at a $200 fix or a $500 one. If you want the full scope of what we handle, our Gate Repair in Mira Mesa page covers the services side in detail. This page is about the money, and we’ll give you the real numbers for the Mira Mesa market.
Key Takeaways
- Most residential gate repairs in Mira Mesa cost $250 to $420; simple mechanical fixes start around $175.
- Commercial slide-gate and swing-gate operator repairs run $350 to $900 depending on the brand and part.
- Brand matters: a Ghost Controls or Mighty Mule homeowner unit often prices lower than a FAAC or DoorKing commercial board.
- Free estimates and gate-only diagnostics mean you’re not paying a generalist to guess at a system they don’t know.
- Call (833) 593-4660 for a same-day quote.
Gate Repair Cost Breakdown (2026)
Here’s what gate repairs actually cost in Mira Mesa this year. These are ranges we see week to week across residential driveways, HOA entries, and small commercial lots. Your exact quote depends on the brand on your property, but these numbers are real and current.
| Repair Type | Typical Price Range |
|---|---|
| Service call / diagnostic visit | $75 – $125 (often waived with repair) |
| Swing-arm operator repair (Ghost Controls, Mighty Mule, Linear) | $180 – $320 |
| Slide-gate operator repair (FAAC, BFT, Elite) | $280 – $550 |
| Control board replacement | $220 – $480 |
| Loop detector / safety sensor replacement | $200 – $400 |
| Keypad or remote access-control repair | $150 – $350 |
| Motor replacement (residential) | $450 – $850 (parts + labor) |
| Motor replacement (commercial, DoorKing or FAAC) | $700 – $1,600 |
| Hinge, roller, or track repair | $175 – $325 |
| Battery backup replacement | $120 – $240 |
What pushes a job toward the top of these ranges? Commercial-grade parts, hard-to-source boards, and any repair that requires re-running low-voltage wiring. What keeps it lower? A mechanical fault on a common residential brand we carry parts for on the truck. Because we work across nine gate brands daily (LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule), we’re rarely special-ordering the part that stalls the job. That alone saves Mira Mesa homeowners the extra week of waiting and the extra trip charge most companies add when a part has to be ordered twice.
What Affects Gate Repair Pricing in Mira Mesa
Two gates can look identical and price $150 apart. Here’s what actually moves the number:
- The brand on your property. An entry-level Ghost Controls swing arm and a commercial FAAC hydraulic operator share little beyond being motors. Parts for the residential lines are cheaper and easier to stock; commercial boards cost more and sometimes need a specific replacement. We work on the brand already on your property, so you’re not paying a premium just because we had to learn the system.
- Electric vs. manual. A sticking manual latch is a $175 to $250 job. A powered slide gate that won’t respond involves the motor, the control board, the safety sensors, and often the access control, so troubleshooting takes longer and prices higher. Electric gate work is a different skill set than a hinge repair, and Mira Mesa has plenty of both.
- Access-control complexity. Keypads, loop detectors, intercoms, and remote receivers all add components to test. A single failed keypad is straightforward. A gate where the keypad, the loop detector, and the remote all stopped working at once usually points to one upstream fault, and our brand-agnostic diagnostics exist to find that fault instead of selling you three parts.
- Age and wear. Gates in Mira Mesa deal with dry, dusty summers and the occasional Santa Ana wind event. Dust gets into tracks and loop detectors, wind bends arms and knocks alignment out. Older systems bring more corroded connections and worn moving parts, so a ten-year-old operator typically needs slightly more labor than a two-year-old one.
- Residential vs. commercial. A property manager’s slide gate on a business driveway or HOA entry sees dozens of cycles a day instead of a few. Commercial repairs cost more because the equipment is heavier-duty and the parts are pricier, and we treat the two the same way on the diagnosis side.
- Emergency timing. A gate stuck open during a weekday afternoon is a routine call. A gate stuck closed on a weekend when you can’t get your car out is a priority call, and scheduling at that hour can affect the price. Ask when you call; we’ll tell you honestly what timing does to the quote.
How to Save on Gate Repair
None of this requires a coupon or a special. The savings come from skipping steps that don’t help.
- Get a real diagnostic before agreeing to replace. The single biggest waste in gate repair is paying for a full motor replacement when a control board, a sensor, or a limit switch was the actual problem. Because we’re trained across nine brands, we identify the real fault first. If a $250 board fixes it, that’s what we quote.
- Ask whether the part is on the truck. Companies that stock one or two lines end up ordering parts and adding a second visit. A gate specialist who carries common components for the major brands saves you the return trip and its cost.
- Don’t ignore the small stuff. A slightly dragging gate or a keypad that works “most of the time” is a cheap fix today and a motor or board replacement later. Catching wear early is the cheapest repair there is.
- Take the free estimate. We quote before we work. Call (833) 593-4660 and you’ll get a number, not a range-and-maybe. That’s the whole point of a pricing guide like this one.
One thing worth saying plainly: if your gate is a powered swing or slide system, the motor, springs, and moving arms can cause serious injury when they fail under load. Don’t try to disassemble or force an operator yourself. That’s a trained-professional job, and it’s part of why we do the diagnosis ourselves rather than talking you through it over the phone.
Repair or Replace? A Quick Way to Think About It
As a rule of thumb, if a repair costs more than half the price of a new system and the existing operator is already showing wear elsewhere, replacement starts to make sense. But that line is different for a commercial DoorKing that’s served a parking lot well for a decade than for a residential Ghost Controls unit that just needs a $200 arm. Our job on the diagnostic is to tell you which side of that line you’re on, not to push the more expensive option. When replacement is the right call, we install entire systems too, so you’re not handed off to a stranger who has to relearn your setup. We build installations with fewer future repair calls in mind, which is the cheapest thing we can do for you long term.
If you’d like to see how repair and installation fit together, or you’re starting from the main page for a broader picture of what we do, head over to our home page. From there you can reach any of the cost, repair, and neighborhood guides below.
Related pages worth a look
We’ve built these pages for the questions that come up most in Mira Mesa. Each one goes deeper on a specific topic.
- Electric gate repair cost guide – what motors, boards, and sensors really run
- Gate motor replacement cost – when a motor is done and what a new one costs
- Gate installation cost in Mira Mesa – for full-system pricing
- Swing gate repair in Mira Mesa – arms, hinges, and operators
- Sliding gate repair in Mira Mesa – tracks, rollers, and slide operators
- Automatic gate repair in Mira Mesa – access control and automation faults
- Gate control board repair – the board behind most “dead” gates
- Gate repair in Scripps Ranch – a neighboring area we serve
- Gate repair in Sorrento Valley – commercial and residential
- Gate repair in Poway – nearby service
- Gate maintenance in Mira Mesa – the cheapest way to avoid a big repair bill
FAQs – Gate Repair Cost in Mira Mesa
How much does gate repair cost in Mira Mesa?
Most residential gate repairs in Mira Mesa cost between $250 and $420, with simple mechanical fixes starting around $175 and complex control-board or loop-detector jobs reaching $480. Commercial slide-gate repairs run $350 to $900. Call (833) 593-4660 for an exact quote; estimates are free.
Is it cheaper to repair or replace my gate?
Repair is almost always cheaper unless the fix exceeds half the cost of a new system and the operator is showing other wear. A $250 board replacement beats an $850 motor swap every time. We diagnose the real fault first so you’re not paying for a replacement you didn’t need. Call (833) 593-4660 and we’ll tell you which way the numbers lean.
Can you come today for a gate repair in Mira Mesa?
Yes, same-day service is often available, and it doesn’t usually cost more than a scheduled visit. Because we carry parts for the major gate brands on the truck, many repairs finish in a single trip. Call (833) 593-4660 and we’ll give you the earliest window.
Why does my gate brand affect the repair price?
A residential brand like Ghost Controls or Mighty Mule typically prices lower than a commercial FAAC or DoorKing because the parts cost less and are faster to source. We’re trained on all nine major lines, so we work on the brand already installed on your property instead of quoting you a new system because we don’t recognize it. Call (833) 593-4660 for a brand-specific estimate.
Do you charge for the diagnostic visit?
The service call runs $75 to $125, and we typically fold it into the repair cost when you move forward with the work. You’ll know the full number before we start. Call (833) 593-4660 and we’ll confirm the current diagnostic policy when you book.
Pricing reflects the Mira Mesa market as of 2026. Gate Repair Mira Mesa offers free estimates – call (833) 593-4660.
Gates stuck, dragging, or just making a noise you don’t like? We repair gates and only gates, from a bent arm on a Ghost Controls unit to a failed FAAC commercial board, and we work the brand already on your property. Call (833) 593-4660 for a free estimate and get a straight answer on what it’ll cost before anyone touches your gate.
What Our Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Norma Guzman"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Marisol Martinez"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
- Alejandro Morales